BODHEE · MANUFACTURING SCHEDULING
Production, Quality, and Maintenance — synchronised on one live model of your plant. Constraint-aware. Continuously replanning.
Process plants plan on Sunday night and spend the week firefighting Monday's assumptions. Every outage, deviation, or priority order sends planners back to spreadsheets — and the floor waits. Three structural pains keep the cycle running, and they compound each other every shift.
The moment the real plant starts running, they break. A campaign extends. A reactor goes down. A batch gets held in QC. The schedule freezes; the plant doesn't. Someone spends the morning rebuilding a spreadsheet everyone stopped trusting by 10 a.m.
Typical OEE in regulated process manufacturing sits between 35% and 65% — against a world-class benchmark of 85% (industry-reported). Equipment availability often runs below 50% of staffed time.
Production, Quality, and Maintenance plan independently on schedules that can't replan. One changes; the other two don't find out until Monday. That cross-functional drift accounts for roughly 10–15% of capacity loss in process plants (directional industry estimate).
These three pains can't be solved separately. So Bodhee was built as a product family that solves them together.
Bodhee is an enterprise SaaS product family for process manufacturing scheduling. Three products sharing one live model of your plant — so changes in any product ripple to the others instantly. All three are grounded in the Bodhee Process Digital Twin. See how the Digital Twin works →
Bodhee Production Scheduling synchronises your entire production stack — lines, equipment, manpower, material and shared utilities — against the full constraint universe. When something breaks, the schedule rebuilds itself within minutes. Planners stop rebuilding by hand. Operators stop guessing what's next. The plant stops losing hours to the gap between plan and reality.
82 batches scheduled
Wednesday 06:00 – 18:00 · on-time 94%
All three products share the Bodhee Process Digital Twin. That's why an event in one triggers synchronised rescheduling in the others. How Bodhee works →
Bodhee is designed to deploy alongside your existing stack — ERP, MES, LIMS, CMMS, SCADA — without rip-and-replace. Most deployments follow the same four-phase pattern.
Phase 1
Scheduling-maturity assessment of the target plant. Pain mapping across production, quality, and maintenance. Integration inventory of your existing stack. Deployment roadmap and ROI model.
Phase 2
Plant-specific configuration at line-level granularity. Integration with your ERP, MES, EAM, HRMS, LMS, QMS, and LIMS. Master data enrichment — the Digital Twin gets built against your plant's actual constraints.
Phase 3
Parallel run alongside your current scheduling process. Validation against real plant behaviour. Planner and operator training. Model calibration against shift-by-shift patterns the plant actually produces.
Phase 4
Bodhee becomes the primary scheduling system for the plant. Agent feedback loop tightens decision quality. Quarterly reviews against actual-versus-scheduled performance. Additional Bodhee products deploy when the plant is ready.
Specific integrations and deployment sequence vary by product. See each product page for detail.
Bodhee doesn't sell a generic MES add-on. It ships with domain knowledge for process manufacturing — where equipment is expensive, campaigns are long, regulatory stakes are high, and a single scheduling misstep can cost a batch.
Campaign scheduling for regulated pharmaceutical production. Cleaning validation, QC hold times, and multi-product changeovers modelled into one live plant schedule.
Multi-client scheduling with strict chain-of-custody and segregation. Slot allocation across competing programmes without compromising release timelines.
Campaign sequencing for active pharmaceutical ingredient lines. Cleaning validation, intermediate hold times, and multi-product changeovers built into the schedule.
Multi-purpose reactor scheduling with campaign sequencing. Cross-contamination rules enforced at the scheduling layer. Handles batch-to-continuous hybrid flows.
FSMA and HACCP-aligned scheduling. CIP/SIP cycle optimisation. Allergen changeover management. Shelf-life-driven sequencing that maximises freshness without sacrificing throughput.
Across Production, Quality Control, and Maintenance scheduling — what process manufacturers see with Bodhee, at the scale we've delivered it.
OEE gain
across regulated process manufacturing
On-time delivery
across regulated process manufacturing
Scheduling effort
planner time before / after
Rescheduling cycle
live, during shift
Typical OEE in regulated process manufacturing: 35–65% (industry-reported) · Cross-functional scheduling misalignment costs 10–15% of capacity (directional) · Unplanned downtime: ~USD 150K / hour (Siemens / Senseye)
Based on Neewee deployment observations in regulated process manufacturing. See product pages for product-specific outcomes.
Trusted by manufacturers worldwide
30-minute tour with a solutions engineer who has actually shipped a pharma or specialty-chemical scheduler. No slide decks unless you ask.
